marsgizmo Filament Bunker V2 – how to keep your 3D Printing Filament dry

This is my marsgizmo Filament Bunker V2, to store your 3D Printing Filaments Dry.
You can get the FREE design and more details from here: https://bit.ly/2QK7sUs
👇🙂 more details

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
More details here (same are also in the linked design):
These are my affiliate links.

For each individual Filament Bunker you need:
– 1 x cereal container
– 4 x bearings
– 1 x about 50cm (20”) of PTFE tube
– 1 x PTFE connector (for 4mm OD PTFE tube)
– 50 grams (1/2 cup) of Silica beads
– 3D Printed Parts (1 x Base, 1 x Silica Lid, 2 x Cylinders). No supports needed for printing.

The box with big handgrips can hold Spools of 60mm width (usually 750g Spools) and the new one can hold 67mm width (usually 1Kg Spools).

The Cereal Container for 750g Spools (try getting the one below instead): https://geni.us/pSLAo
I recommend to get the new containers instead (like mentioned in the video, good for 1 Kg Spools): https://geni.us/nrcXpYG

I will try to update in a few weeks the design to fit 1 KG Spools.
The existing V2 design is still compatible with these new Spools (will just hold 750 grams Spools)

The volume of both containers is 4 liters (16.9 Cups, 135.3oz), DO NOT GET the smaller version!

Using regular 608 ZZ (or 2RS) skateboard bearings:
– pack of 10: https://geni.us/uLMvbQ
– or pack of 100: https://geni.us/OiChoH

PTFE tube and connectors. I recommend 3mm ID / 4mm OD, but you can also use regular 2mm ID / 4mm OD
(ID – Inner Diameter, OD – Outer Diameter)
– 3mm ID / 4mm OD: https://geni.us/NIfXBG4
– 2mm ID / 4mm OD: https://geni.us/4YjDen
– M10 PTFE connector: https://geni.us/JQRSNXl

Silica Beads: https://geni.us/mRIfUM
Or get them in 5g packages: https://geni.us/5Bfq

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Printing details:

– no supports needed!
– can easily be printed from PLA (try to use quality PLA), otherwise go with PETG.
– 0.2mm layer height for better quality, but also 0.3mm layer height works fine (lower quality)

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
3D printing Filaments:

Gold: Extrudr Biofusion Gold Filament: https://geni.us/3VQkkFK
(Another similar one: https://geni.us/v5Bwq)
Red PLA filament: https://geni.us/RpCQ
Blue: Extrudr NX2 Blue filament: https://geni.us/NHa9Lso
Purple: Fillamentum PLA Extrafill Vertigo Mystique
White PLA filament: https://geni.us/0AUGd0C
Fillamentum Vertigo Jade Green: https://geni.us/orOMQSr
Blue PLA filament: https://geni.us/uMV3
Sparkly Black filament: https://geni.us/2cRfUB

Good entry level 3D Printer:
– Amazon: https://geni.us/ender-3-v2
– Bannggood: https://geni.us/yPoJc

Auto Bed Levelling 3D Printer:
– Amazon: https://geni.us/lXww
– Banggood: https://geni.us/Fluw9Fx

Big format 3D Printer:
– Amazon: https://geni.us/9Prm4
– Banggood: https://geni.us/1nDLcbO

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
If you like my videos, please support me with a Like and Subscribe.
It helps me create more videos.. and I’ll be forever grateful ❤️

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
My Instagram Channel: https://www.instagram.com/marsgizmo/
My Twitter: http://twitter.com/marsgizmo/
My TikTok: https://vm.tiktok.com/ZMe9vkLdh/

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Download the FREE design from here: https://bit.ly/2QK7sUs

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
This video is Sponsored by Thangs.com
Their support helps me create nice videos for you 😊

#marsgizmo #shorts